Power your motorhome with confidence. Our Complete Solar Kit is built to deliver reliable, high-performance off-grid energy tailored to your space and storage needs. Every kit includes all the essentials for motorhome solar power generation, monitoring, and safe distribution, with options to add your required solar array, Battery to battery charging & lithium battery storage. This kit is specifically designed for higher amperage batteries with can bus communications to the Victron Cerbo. Can Bus communications is the ultimate integration between your Victron system and your lithium battery.
Once you've build this kit you can then add the 240v sockets, and run 12v supply lines from your fuse box.
🔄 Kit Variants
☀️ Solar Kit
Select the solar panel, fitting kit and MPPT charger that meets your requirements
🔋 DC to DC Charger
If you wish to charge your leisure battery on the move. Add the DC to DC charger option.
🔋 Batteries
Select from our range of lithium batteries. Our Elite range of batteries connect direct to the Cerbo GX for ultimate control. No Victron Smart Shunt require in this system
⚠️ Cable Sizing Note
All kits include 16mm² DC-DC charger cable as standard. For cable runs exceeding 10m, we recommend upgrading to 25mm² for optimal performance.
⚠️ Installation
Installation should be carried out by qualified electrician.
What's in the Box
The core kit provides you with all the key components to build your inverter system. Just add your solar panels, DC to DC charger and battery and we will supply all the bits and pieces to install your system.
We don’t include the external shore socket or cable to the camp site.
Victron MultiPlus-II 12V 3000VA
Victron Cerbo GX 2
Cerbo GX Touch 50
Lynx Distributor (M8)
VE Direct Cable (Inverter to Cerbo, MPPT to Cerbo, Smart Shunt)
95mm2 cable Black
95mm2 cable Red
16mm2 cable Black
16mm2 cable Red
400A MEGA fuse (PACK OF 5)
300A MEGA fuse (PACK OF 5)
60A MEGA fuse (PACK OF 5)
Mega Fuse Holder
T95-8 Connector Lugs
T95-10 Connector Lugs
T16-8 Connector Lugs
Motorhome Consumer Box (YCR Build)
Battery Isolator 6006
Fuse Block ST-Blade 12 Circuits with Grounding/Cover
Arctic Cable 2.5mm
2.5mm ferrules (10 per pack)
Add the Solar Kit If you add the solar kit we will also include the solar panel of your choice, plus a DC Isolator all the cabling and connectors required to connect to the main kit Add the DC to DC Converter If you add the DC to DC Converter we will also include the converter of your choice, plus cable and connectors required to connect to the main inverter kit.
Add a Skyenergi Leisure Battery All the cabling is already supplied with the main kit.
⚠️ Installation
Installation should be carried out by qualified electrician.
A full conversion can feel overwhelming – Let us take the pressure. Tell us your power needs and available space, and we’ll handle the rest.
We’ll build a fully assembled energy board with all components pre-wired,configured, and ready to go— seamlessly integrated with our Skyenergi lithium leisurebattery solutions.
