Victron Energy Phoenix Inverter 48/800 230V VE.Direct IEC – PIN481800100

Victron Energy PIN481800100
The Phoenix Inverter 48/800 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
This unit has the an IEC plug.
Features
VE.Direct communication port
The VE.Direct port can be connected to:
A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully Configurable:
Low battery voltage alarm trip and reset levels
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage: 210 – 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Monitoring
In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven it’s reliability over many years. The Phoenix Smart Inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the loads decreases below a preset value. Once in standby the inverter will switch on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
DC connection with screw terminals
No special tools needed for installation.
Monitor, operate & control over your system
VictronConnect lets you get live status information and configure your Phoenix Inverter 48/800 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle. Visit our page for Car battery and Leisure Battery
The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs.
We are Victron Energy distributors, if you require any help or assistance, please feel free to contact us. If you cannot find the specific item you require, send us a message and we can always point you in the right direction.