Victron Energy Phoenix Inverter 12/375 230V VE.Direct Schuko PIN121371200 *with UK adapter*

Victron Energy PIN121371200

The Phoenix Inverter 12/375 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
This unit has the Schuko plug but comes with a UK plug adapter
Features
VE.Direct communication portThe VE.Direct port can be connected to:

A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully Configurable:

Low battery voltage alarm trip and reset levels
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage: 210 – 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level

MonitoringIn- and output voltage, % load and alarms

Proven reliability
The full bridge plus toroidal transformer topology has proven it’s reliability over many years. The Phoenix Smart Inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the loads decreases below a preset value. Once in standby the inverter will switch on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
DC connection with screw terminals
No special tools needed for installation.
Monitor, operate & control over your system
VictronConnect lets you get live status information and configure your Phoenix Inverter 12/375 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle.The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs.

Technical Specification

GTIN

8719076045366

Voltage

12V

Cont. Output Power at 25°C

375VA

Peak Power

700W

Output AC Voltage

230V

Protection Category

IP21

Efficiency

89%

Bluetooth Enabled

No

Plug Type
Schuko

Dimensions

H86 x W165 x D260mm

Weight

3.0Kg

Warranty

5 Years

Country of Manufacture

China

We are Victron Energy distributors, if you require any help or assistance, please feel free to contact us. If you cannot find the specific item you require, send us a message and we can always point you in the right direction.