Search

Victron Energy Phoenix Inverter 12/1200 230V VE.Direct Schuko PIN122121200 *with UK adapter*

SKU: VE-PIN122121200

£248.90 Inc. VAT

The Phoenix 12/1200 VE.Direct inverter allows you to power domestic
equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at
12V, 24V or 48V DC.
This unit has the IEC plug.

Features of the Phoenix Inverter 12/1200 VE.Direct
VE.Direct communication port
The VE.Direct port can be connected to:

A computer (VE.Direct to USB interface cable
needed)
Apple and Android
smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:

Low battery voltage alarm
trip and reset levels
Low battery voltage cut-off
and restart levels
Dynamic cut-off: load
dependent cut-off level
Output voltage 210 – 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO
mode sense level

Monitoring:

In- and output voltage, %
load and alarms

Proven reliability
The full bridge plus toroidal transformer topology has proven its
reliability over many years. The Phoenix Inverter 12/1200 VE.Direct are short
circuit proof and protected against overheating, whether due to overload or
high ambient temperature.

High start-up power
Needed to start loads such as power converters for LED lamps, halogen
lamps or electric tools.

ECO mode
When in ECO mode, the Phoenix Inverter 12/375 VE.Direct will switch to
standby when the load decreases below a preset value (min load: 15W). Once in
standby the inverter will switch on for a short period (adjustable, default:
every 2,5 seconds). If the load exceeds a preset level, the inverter will
remain on.

Remote on/off
A remote on/off switch can be connected to a two pole connector, or
between battery plus and the left hand contact of the two pole connector.

DC connection with screw terminals
No special tools needed for installation.

Monitor, operate & control your system
VictronConnect lets you get live status
information and configure your Phoenix Inverter 12/1200 VE.Direct when connected
to a VE.Direct Bluetooth Smart Dongle.

The REC040010210R is the correct controller
for the Phoenix Inverter VE.Directs.

Not sure what size inverter you need, why not take a look at our guide to sizing an inverter.

Additional information

Weight 7.4 kg
Brand

Victron Energy

Manufacturer Part Number

PIN122121200

Voltage

12V

Cont. Output Power at 25°C

1200VA

Peak Power

2200W

Output AC Voltage

230V

Efficiency

91.00%

Protection Category

IP21

Bluetooth Enabled

No

Plug Type

Schuko

Weight

7.4Kg

Warranty

5 Years

Country of Manufacture

China

Dimensions

H117 x W232 x D362mm